Selected Functions/Programs - Beko B5DT59442W User Manual

•
Remote control
You can use this auxiliary function key to
connect your product to smart devices. See
the HomeWhiz and the Remote Control
function for detailed information.
•
Adapted programme
This auxiliary function can only be used for
the Cottons and Synthetics programs with
the HomeWhiz app. When this auxiliary
function is activated, you can add up to 5
auxiliary rinse steps to the program. You
can choose and use some help functions
that are not found on your product. You can
increase and decrease the duration of
cotton and synthetic programs within a safe
range.
If the Specialized program auxiliary
function is selected, washing
performance and energy consumption
are different from the indicated value.
•
To dry
These functions allow you to dry the
laundry after washing. Refer to the
program table for which programs can be
used to select this auxiliary function.
6.11.2 Selected functions/programs by
pressing the function buttons for
3 seconds
•
Drum Cleaning+
Press and hold the relevant auxiliary
function button for 3 seconds to select the
program. Clean the drum regularly (once a
month/2 months) to ensure the required
hygiene. Before the program starts, steam
is supplied to soften the residues in the
drum. Enables the program when the
machine is completely empty. For better
results you need powder
anti-scale agent (drum cleaning material)
suitable for washing machines in
compartment "2". At the end of the drum
cleaning, this program performs a drying
step to dry the inside of the drum.
This is not a washing program. This
is a maintenance program. Do not
run this program if there is
anything inside the machine. When
you try to operate the machine, it
automatically senses that a load is
present. The machine can exit or
resume the program depending on
the model. If the program is
resumed, the washing performance
will not be optimal.
•
Anti-crease+
This function is selected when the relevant
auxiliary function button is pressed and
held for 3 seconds and turns on the
program follow-up light of the relevant
step. When the function is selected, the
drum rotates for a maximum of 8 hours to
prevent the laundry from creasing at the
end of the programme. You can cancel the
program and take out your laundry at any
time during these 8 hours. Press the
function selection button or the machine's
on/off button to cancel the function. The
program progress light remains on until the
function is canceled or the step is ended. If
the function is not cancelled, it will also
remain active in subsequent wash cycles.
•
Steam
This function can be selected by pressing and
holding the relevant auxiliary function button
for 3 seconds.
This function helps you reduce creases in
your cotton, synthetic and blended clothes,
shortens ironing time and removes dirt by
softening.
NL/38