Beko B5DT59442W User Manual page 51

• Voltage is low. >>> Washing time is
extended to avoid poor washing results
due to low voltage supply.
• Supply water temperature is low. >>>
Time required to heat up the water
increases in cold seasons. The washing
time can also be extended to avoid poor
washing results.
• Number of flushes and/or flushing water
have increased. >>> Product increases the
amount of rinse water if a good rinse is
required and adds an extra rinse phase if
necessary.
• Excessive foaming has occurred and the
automatic foam absorption system has
been activated due to the use of too
much detergent.
>> > Use the recommended amount of
detergent.
Program duration does not count down. (On
models with screen) (*)
• Timer switch stops during water supply.
>>> Timer indicator does not run back
until the product has enough water. The
product will wait until there is enough
water to avoid poor washing results due
to lack of water. The timer indicator will
then resume running backward.
• Time switch stops during warm-up.
> > > The timer indicator does not count
down until the product has reached the
selected temperature.
• Timer switch stops during spin. >>> The
automatic unbalanced load detection
system has been activated due to an
uneven distribution of the laundry in the
drum.
Program duration does not count down. (*)
• The charge in the product is not evenly
distributed. >>> The automatic
unbalanced load detection system has
been activated due to an uneven
distribution of the laundry in the drum.
Product does not switch to the spin
phase. (*)
• The charge in the product is not evenly
distributed. >>> The automatic
unbalanced load detection system has
been activated due to an uneven
distribution of the laundry in the drum.
• The product will not spin if the water is
not completely drained. >>> Check the
filter and drain hose.
• Excessive foaming has occurred and the
automatic foam absorption system has
been activated due to the use of too
much detergent.
>> > Use the recommended amount of
detergent.
Washing result is poor: Laundry becomes
grey. (**)
• Insufficient amount of detergent was used
for a long time. >>> Use the
recommended amount of detergent
suitable for the water hardness and the
laundry.
• Washing has been carried out at low
temperatures for a long time. >>> Select
the correct temperature for the laundry
to be washed.
• Insufficient amount of detergent has been
used with hard water. >>> Using
insufficient detergent with hard water
causes dirt to stick to the clothes, which
over time turns the clothes gray. It is
difficult to remove grayness once it
occurs. Use the recommended amount of
detergent suitable for the water hardness
and the laundry.
• Too much detergent has been used. >>> Use
the recommended amount of detergent
suitable for the water hardness and the
laundry.
Washing result is poor: Stains do not
disappear or the laundry is not white. (**)
• Insufficient amount of detergent has been
used. >>> Use the recommended amount
of detergent suitable for the water
hardness and the laundry.
NL/51