Restoring The System; Getting Ready To Reinstall; Reinstalling The Ipower System - Polycom iPower 600 User Manual

iPower Collaboration System Tips and Troubleshooting

Restoring the System

Getting Ready to Reinstall

Reinstalling the iPower System

Note
28
When you restore the iPower system, the system is returned to its original factory
state. You should only restore the system when directed by a Polycom support
representative.
For a list of system default settings, see Appendix A, "System Default Settings."
Before you reinstall your system software:
1. Back up the Local Directory data.
Save your Local Directory data by copying
C:\Program Files\PictureTel\vcs\tsdir.ini
Record the configuration settings.
2.
Make a record of your configuration settings by running the iPower Operating
Statistics utility. On the Configuration Summary page, click
file
iPowerSysConfigLog.txt
help reconfigure the system after you reinstall the software.
Make sure you have the system serial number and your LAN and ISDN
3.
settings.
The serial number is printed on the back of the computer box.
When you reinstall your iPower system software, any Directory entries and
customized settings you have entered are lost, and any additional software is
erased, including system upgrades that you may have applied. (When you install
upgrades to the system, Directory entries are retained and any additional software
you may have installed is not erased.
The iPower system software does not provide an uninstall program to remove the
system software. However, reinstalling the system software will overwrite all of
the files created and installed during the original installation.
to external media.
to external media. You can use this information to
to save the
Save As
www.polycom.com