Polycom iPower 600 User Manual page 26

Chapter 3 - Tips for Tasks You Do Rarely
© Polycom, Inc.
For information about how to configure the system to use WebRemote and how to
set up RAS access over ISDN, see the AdminTools online help. To access this help,
press the button on the remote control, press
HELP
when you are within the AdminTools application.
Help
WebRemote also requires you to log on with an administrator account and to have
one of the following browsers:
Microsoft Internet Explorer 5.0 or higher
®
Netscape Navigator 4.6 or higher
To use WebRemote:
1. Launch your web browser.
2. Enter the system's IP address or DNS name.
A web page opens.
3. Click
WebRemote.
4. Enter a user name and password for an account that has administrator
privileges on the iPower system.
WebRemote opens.
Use WebRemote as follows:
5.
Click...
Call Control
AdminTools
Diagnostics
System State
Statistics
Alarms
Help
For more information about WebRemote, see the WebRemote online help.
Access the iPower system Collaboration application.
Access the AdminTools application.
Access the Hardware Diagnostics application to perform
tests and download error log files.
View Readiness Monitoring error messages, shut down the
iPower system applications, or restart the system.
View the system statistics.
View SNMP alarms.
Access WebRemote online help.
on the keyboard, or click
F1
To...
21