Setting Up User Accounts For Standard Windows Logon; Setting Up Additional Software; Remote Management Software; Webremote - Polycom iPower 600 User Manual

iPower Collaboration System Tips and Troubleshooting

Setting Up User Accounts for Standard Windows Logon

Setting Up Additional Software

Remote Management Software

WebRemote

20
the default user account. Auto Logon is the default logon option for the iPower
system.
The available user accounts are as follows:
Type of Account Description
Local user Requires a unique account
account for each user, which allows
the user to access the
system.
Domain account Requires a unique account
for each user, which allows
the user to access each
system in the domain.
iPower system Allows all users to access the
default user system. The default user
account name and password appear
in the Logon dialog box.
This section describes additional software that you may have added to the iPower
system, such as remote management software, Document Servers, PathNavigator
Conference-on-Demand, and Polycom WebOffice.
Three remote management software applications are available with the iPower
system: WebRemote, SNMP Management, and the Polycom Global Management
System.
Before you use WebRemote, you must configure your iPower system to use it. If
you plan to perform network management of the iPower system, but your network
management station (NMS) is not connected to the system via a LAN, you may
also need to set up RAS access over ISDN.
How to Create This Account
Use the Windows User Manager
to create local user accounts. For
specific instructions, see your
Windows documentation.
Use the Windows User Manager
for Domains to create domain
accounts. For specific instructions,
see your Windows documentation.
Use the AdminTools Logon and
Security page to set up the iPower
system default user account. Set
the default user name and
password using the Default User
Account section of this page.
www.polycom.com