Rear Panel; Remote Control - Strong SRT 24HA3003 User Manual

1. Power indicator /remote sensor
2. Speakers
3. Buttons: Input source, Menu, V-/V+, CH-/CH+, Standby/ON.

2.3 Rear Panel

NOTE:
1. HEADPHONE
2. VGA
3. SCART
4. PC AUDIO
5. SAT IN
6. ANT/CABLE IN
7. S/PDIF (coax. output)
8. HDMI
9. USB
10. AV IN
11. YPbPr

2.4 Remote control

1. q
2. !
3. DTV
4. (ASPECT)
5. (PICTURE) PIC
6. SOUND
7. 0 ~ 9
8. (-/---)
9. 9
10. INFO
11. FREEZE
12. TV/R
13. COLOUR BUTTONS
14. SLEEP
15. SOURCE
16. ENTER
17. pqt u
18. MENU
19. 
The graphics are for representation only.
Speakers will be muted when earphone is plugged in and headphone
selected.
Connect a VGA source, like computers may have
Connect devices like DVD or VCR using SCART cable
Connect to audio output of PC
Connect a satellite dish to the TV for searching programmes.
Connect a terrestrial antenna or cable connection from your provider to the
TV for searching programmes.
Use an RCA cable to connect your TV to a compatible digital amplifier or
Home theatre set.
Connect HDMI input signal from a signal source such as DVD, Blu-ray player
or game console.
Connect a USB device for playback of multimedia files
3.5 mm female jack entry for composite video and left/right audio
connection.
Connect YPbPr sources.
Press to turn the TV on or standby.
Press to mute or restore the volume.
Press to go back to Digital TV.
Change aspect ratio.
Change picture mode.
Change sound mode
Choose channel directly.
Change the maxium input programme digit
Press to go back to previous viewed channel.
Display information about the current source.
Press to hold the picture
Switch between TV and radio.
Press to execute the prompt function in TV or DTV menu mode.
Select the sleep time, such as 10 min, 20 min etc.
Press to change signal source
Confirm the selection.
Navigate the menu.
Open the menu options. Step back in some menu options.
Exit the current menu.
Fig. 3
Fig. 4
5