Installation 2.1 Default Pin Code: 0000; Side Panel; Rear Panel; Remote Control - Strong 24HY1003W User Manual

English
2.0 INSTALLATION
2.1 Default PIN code: 0000

2.2 Side panel

NOTE:
1. USB:
2. :
3. SERVICE:
4. PCMCIA:

2.3 Rear panel

NOTE:
1. p
2. q
3.
4. ANTENNA (AIR/CABLE/LNB) IN:
5. HDMI1/HDMI2:
6. SCART:
7. POWER:

2.4 Remote control

1.
q
2.
PICTURE
3.
4. SOUND
5. ZOOM
SUBTITLE
6.
7. EPG
8. FAV
0~9
9.
10. CHN LIST
11. RETURN
12. MENU
The graphics are for representation only.
USB port.
Headphone or Earphone audio output, speakers will be muted when
earphone is plugged in and headphone selected.
Service port.
Connect a Conditional Access Module (CAM).
The graphics are for representation only.
Programme up button
Programme down button
Switch on the TV, main menu and Standby mode.
Connect an antenna, cable, satellite dish to the TV for
searching and receiving programmes.
Connect HDMI input signal from a signal source such as
DVD, Blu-ray player or game console.
Connect devices like DVD or VCR using SCART cable.
Connect the main power cable
Press to turn the TV on or standby.
Press to mute or restore the volume.
Change picture mode.
Change sound mode.
Change aspect ratio.
Enable/disable subtitles in DTV/USB mode.
Press to display the current EPG information in DTV mode.
Press to view your assigned favourite channels. Press
p q to cycle through your assigned favourite channels,
press ENTER to confirm.
Choose channel directly.
Press to enter into the channel list.
Press to back to previous viewed channel.
Open the menu options.
Fig. 2
Fig. 3
Fig. 4
5