Installation 2.1 Default Pin Code: 0000; Front Panel/Underside; Rear Panel; Remote Control - Strong SRT 32HC2003 User Manual

2.0 INSTALLATION
2.1 Default PIN code: 0000

2.2 Front panel/underside

NOTE:
1. Power indicator /remote sensor
2. Speakers
3. Buttons: Input source, Menu, V-/V+, CH-/CH+, Standby/ON.

2.3 Rear Panel

NOTE:
1. SCART
2. SAT IN
3. ANT/CABLE IN Connect a terrestrial antenna or cable connection from your provider
4. S/PDIF (coax. output)
5. COMMONINTERFACE (CI)
6. HDMI 1
7. HDMI 2
8. USB
9. Mini AV IN
10. Mini YPbPr
11. HEADPHONE

2.4 Remote control

1. q
2. !
3. DTV
4. (ASPECT)
5. (PICTURE) PIC Change picture mode.
www.strong.tv
The graphics are for representation only.
The graphics are for representation only.
Connect devices like DVD or VCR using SCART cable
Connect a satellite dish to the TV for searching programmes.
to the TV for searching programmes.
Use an RCA cable to connect your TV to a compatible digital amplifier
or Home theatre set.
Connect a Conditional Access Module (CAM).
Connect HDMI input signal from a signal source such as DVD, Blu-ray
player or game console.
Connect HDMI input signal from a signal source such as DVD, Blu-ray
player or game console.
Connect a USB device for playback of multimedia files
To connect your video camera or other device using 3.5 mm AV cable to
your TV to play videos on your TV screen
Connect YPbPr sources.
Speakers will be muted when earphone is plugged in and headphone
selected.
Press to turn the TV on or standby.
Press to mute or restore the volume.
Press to go back to Digital TV.
Change aspect ratio.
Fig. 2
Fig. 3
Fig. 4
5