Picture Menu; Sound Menu - Strong SRT 24HA3003 User Manual

5.2 Picture menu

Picture Mode
Colour Temperature
Noise Reduction
5.2.1 Contrast/Brightness/Colour
If Picture Mode is set to Personal you are able to change the following settings
Press pq to select an option, then press t u to adjust.
Contrast
Brightness
Colour
Tint
5.2.2 Colour Temperature
In this menu you can change the overall colour cast of the picture.
Press pq to select Colour Temperature, then press ENTER to enter a sub-menu. Press pq to select the
relevant picture effect (DEFAULT: Cold Normal Warm).
Cold
Normal
Warm
5.2.3 Noise Reduction
In this menu you can filter out and reduce the image noise and improve picture quality. Press pq to
select Noise Reduction, then press ENTER to enter a sub-menu.
Off
Low
Middle
High
Default

5.3 Sound menu

Sound Mode
Treble
Bass
Select one of the automatic picture control mode. Available choices are
Dynamic, Standard, Mild. Select Personal to adjust Contrast, Brightness, Colour
and Sharpness as you like.
Select the overall colour tone of the picture. Available choices are Cool,
Medium, Warm.
Eliminates noise in the picture. Available choices are Off, Low, Middle, High and
Default.
Adjust the highlight intensity of the picture, but the shadow of the picture is
invariable.
Adjust the optical fiber output of the entire picture, it will effect the dark
region of the picture.
Adjust the saturation of the colour based on your own preference.
No function
lncrease the blue tone for the white.
Increase the neutral colours for the white.
lncrease the red colour for the white.
Select to turn off video noise detection.
Detect and reduce low video noise.
Detect and reduce moderate video noise.
Detect and reduce enhanced video noise.
Set as Default.
Select your favourite sound mode for each input. Choices are Standard, Music,
Movie, Sports and Personal.
Adjusts the higher frequency of the sound.
Adjusts the lower frequency of the sound.
9