Page 1
LED TV with DVB-T2/C/S2 SRT 32HB4003 SRT 40FB4003 User Manual Korisnički priručnik Bedienungsanleitung Uputsvo za rukovanje Manuel utilisateur Používateľská príručka Manuale utente Használati útmutató Manual do Utilizador Käyttöohje Инструкции за употреба Brukermanual Руководство пользователя Manual del Usuario Посібник користувача Gebruiksaanwijzing Användar Manual...
Page 4
Supplied by STRONG Austria Represented by STRONG Ges.m.b.H. Franz-Josefs-Kai 1 1010 Vienna, Austria Email: support_at@strong.tv 20 Aug 2019 15:29...
Page 5
THE LIMITED AUTHORITY TO USE AS NOTED ABOVE. SIMPLIFIED EU DECLARATION OF CONFORMITY Hereby, STRONG declares that the radio equipment SRT 32HB4003, SRT 40FB4003 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.strong.tv/en/doc Subject to alterations.
To obtain the best performance and safety, please read this manual carefully. Please keep this manual for future reference. TABLE OF CONTENTS 1.0 INSTRUCTION 1.1 Safety Instructions 1.2 Storage 1.3 Accessories 1.4 Equipment set-up 2.0 INSTALLATION 2.1 Default PIN code: 0000 2.2 Front panel/underside 2.3 Rear panel 2.4 Side panel...
1.0 INSTRUCTION 1.1 Safety Instructions Read all of the instructions before operating the set. Keep these instructions well for later use. Only use attachments/accessories specified or provided by the manufacturer (such as the exclusive supply adapter, battery etc.). Please refer to the information on the exterior back enclosure for electrical and safety ...
WEEE Directive Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
2.4.1 32 inch Fig. 3c 1. HDMI 1 (ARC) Connect HDMI input signal from a signal source such as DVD, Blu-ray player or game console or directly to a Digital Amplifier that supports the ARC function. This input is equipped with the ARC (Audio Return Channel) feature to implement audio connections and for a full Dolby audio support.
13. MIX Press this button to superimpose the teletext over the TV programme. Press again to return to normal teletext mode. 14. HOLD Press to hold the teletext page on screen without update and changes. Press again to release the hold state. 15.
Do not place the remote control under direct sunlight which will cause deformation of the unit by heat. When the remote sensor is under direct sunlight or strong lighting, the remote control will not work. If so, please change the lighting or TV's position, or operate the remote control closer to the remote sensor.
Select FTA Channels to search Free-To-Air channels only or All Channels to Crypted search FTA and Encrypted channels Select DTV to search DTV channels only, RADIO to search radio channels only Service Type or All for a complete search. It is recommended to use the default settings. 3.2 DVB-T/T2 installation Terrestrial Setting First select the Tune Type by pressing t u to select DTV, ATV or DTV+ATV (DTV to search digital...
5.0 MENU SETTINGS Below items depend if they are available of select input source. Use INPUT to select another source. 5.1 Menu control (DTV mode) Press MENU to enter the main menu. Press t u to select an item. Press pq and OK to select the submenus.
Detect and reduce moderate video noise. Middle High Detect and reduce enhanced video noise. Default Set as Default. 5.3 Sound menu Sound Mode Select your favourite sound mode for each input. Choices are Standard, Music, Movie, Sports and User. Bass Adjusts the lower frequency of the sound.
5.4.4 ATV Manual Tuning (in DVB-C mode only) First select the source type of ATV. Then in the Channel menu, select ATV Manual Tuning and press OK to access. Highlight and press pq to select Storage To 1 (maybe other number), Sound System and Channel No..
broadcaster, it is possible to set it by pressing OK and set date and time by pressing pq t u. Press p q t u to select Time Zone. Time Zone Press p q to select Sleep Timer. Available Options: Off, 10 min., 20 min., 30 Sleep Timer min., 60 min., 90min., 120 min.,180 min.
Some USB storage devices may not be compatible to operate smoothly with this TV. Back up all of the data in the USB storage device in case data is lost due to an unexpected accident. STRONG does not assume any liability for the losses by misuse or malfunction. Data backup is consumer's responsibility.
Page 19
NOTE: By choosing one of the three media types, for example Movie, the folders inside will display only video files and no other formats. 6.2.1 Play movies Fig. 6 During playback, press INFO or OK to display/exit the menu bar (Fig. 6). Press the USB control buttons on the remote control to do relevant operations.
Page 20
NOTE: If one (or more) file(s) of the play list is selected, the buttons 7 8 will play only selected files. This menu only shows supported files. Files with other file extensions are not displayed, even if they are saved on the ...
Before calling a service technician, review following information for possible causes and solutions for the problem you are experiencing. If the TV does not work properly after checking it, please contact your local service line or STRONG dealer. Alternatively, you can send a support mail via our website www. strong.tv.
Make sure your dish installation is up to standards to minimize rain effects. When in doubt, ask a local satellite specialist for advice. NOTE: If the problem persists after these solutions, please contact your local support centre or send a support mail via our website www.strong.tv. 8.0 SPECIFICATIONS Audio Audio Output:...
Page 23
1x S/PDIF (coax.) 1x USB 1x HEADPHONES Connectors 40 inch 1x ANT/CABLE IN 1x SAT IN 1x SCART 1x CI+ 2x HDMI 1x S/PDIF (coax.) 1x AV IN 1x USB 1x VGA 1x HEADPHONES General Data Operating voltage: 100 ~ 240 V AC 50/60 Hz Power consumption: 32”...
Need help?
Do you have a question about the SRT 32HB4003 and is the answer not in the manual?
Questions and answers