Setup Menu; Media; Reminder When Using The Usb Player - Strong SRT 24HA3003 User Manual

5.7 Setup Menu

Language
TXT Languages
Audio Languages
Subtitle Language
Hearing Impaired
Aspect Ratio
Blue Screen
Reset Restore Factory Default
Software Update (USB)
Environment Home /Shop Switch between Home modes and Shop modes with default more brightness
HDMI CEC
5.7.1 HDMI CEC
CEC Control
Audio Receiver
Device Auto Power Off
TV Auto Power On
Device List
Device Menu

6.0 MEDIA

6.1 Reminder when using the USB player

Some USB storage devices may not be compatible to operate smoothly with this TV.
12
Select the Menu language of your choice. The default setting is English. Press
pq to select the menu language.
Press pq t u to select correct character type belong to language to display
correct the TXT. Selection are: West, East, Russian, Arabic or Farsi.
Press t u to select Primary for main audio track or Secondary next audio
channel if first is not available. Press pq t u to select your chosen Audio
Language, then press ENTER.
Press pq t u to select your chosen Subtitle Language, then pressENTER to
select.
If you like to have extra subtitles support then select this function to On.
Change in this option the picture format from displayed video on the screen.
PressENTER to select. Auto, 16:9, 4:3, Zoom 1, Zoom 2.
If you select a input with no signal and like to have Blue colour screen instead
black. Select this function to On.
Press pq to select this function, by pressing ENTER. You will reset all the
settings contained in the main menu and deleted all installed channels. TV
will go back to First Time Installation. See chapter 3.
If you found new software release on web site and unzipped copied to empty
USB device. You can upgrade the system software of this TV. After insert the
USB, Press ENTER and use t u to select Yes to start update. After successfully
update a message appears on screen. Power off by removing the main power
connector. Remove USB device and power ON. Note: during this process
never power off the main power until this Update process is finished.
and Auto standby to off.
See next chapter 5.7.1.
Select this item and Press ENTER. Press t u to turn the HDMI CEC On or Off.
Press t u to turn the Audio Receiver On or Off.
Press t u to turn on this feature. When finished turn off your TV. The
connected device will turn off automatically.
Press t u to select this option. When finished, turn on the connected device.
The TV will switch on automatically.
Press OK to open the main menu of device.
Access the device menu.