Installation 2.1 Default Pin Code: 0000; Front Panel; Rear Panel; Remote Control - Strong SRT 32HY4003 User Manual

2.0 INSTALLATION
2.1 Default PIN code: 0000

2.2 Front panel

NOTE:
1. Power indicator /remote sensor
2. Standby button
3. Speakers

2.3 Rear panel

NOTE:
32 inch
1. HDMI1 (MHL)/HDMI2:
2. SCART:
3. ANTENNA (AIR/CABLE/LNB) IN:
4. SERVICE ONLY: Service port.
5. CI+:
6. USB1:
:
7.
8. S/PDIF OUT:

2.4 Remote control

1. q
2. !
3. PICTURE
4. SOUND
5. ZOOM
6. SUBTITLE
7. EPG
8. FAV
9. 0 ~ 9
The graphics are for representation only.
The graphics are for representation only.
Connect HDMI input signal from a signal source such as DVD, Blu-ray player
or game console. HDMI1 port supports MHL function.
Connect devices like DVD or VCR using SCART cable.
Connect an antenna, cable, satellite dish to the TV for searching programmes.
Connect a Conditional Access Module (CAM).
USB port.
Headphone or Earphone audio output, speakers will be muted when
earphone is plugged in and headphone selected.
Use a RCA cable to connect your TV to a compatible digital amplifier or Home
theatre set.
Press to turn the TV on or standby.
Press to mute or restore the volume.
Change picture mode.
Change sound mode.
Change aspect ratio.
Enable/disable subtitles in DTV/USB mode.
Press to display the current EPG information in DTV mode.
Press to view your assigned favourite channels. Press pq to cycle through
your assigned favourite channels, press ENTER to confirm.
Choose channel directly.
Fig. 2
Fig. 3
Fig. 4
5