Installation 2.1 Default Pin Code: 0000; Front Panel/Underside; Rear Panel; Remote Control - Strong SRT 24HC3023 User Manual

2.0 INSTALLATION
2.1 Default PIN code: 0000

2.2 Front panel/underside

NOTE:
1. Power indicator /remote sensor
2. Speakers
3. Buttons: Input source, Menu, V-/V+, CH-/CH+, Standby/ON.

2.3 Rear Panel

NOTE:
1. DC IN
2. HEADPHONE
3. VGA
4. SCART
5. PC AUDIO
6. SAT IN
7. ANT/CABLE IN
8. S/PDIF (coax. output)
9. COMMON INTERFACE (CI+)
10. HDMI
11. USB
12. AV IN
13. YPbPr

2.4 Remote control

1. q
2. !
3. DTV
4. (ASPECT)
5. (PICTURE) PIC
The graphics are for representation only.
The graphics are for representation only.
Connect to an outlet.
Speakers will be muted when earphone is plugged in and headphone
selected.
Connect a VGA source, like computers may have
Connect devices like DVD or VCR using SCART cable
Connect to audio output of PC
Connect a satellite dish to the TV for searching programmes.
Connect a terrestrial antenna or cable connection from your provider to the
TV for searching programmes.
Use an RCA cable to connect your TV to a compatible digital amplifier or
Home theatre set.
Connect a Conditional Access Module (CAM).
Connect HDMI input signal from a signal source such as DVD, Blu-ray player
or game console.
Connect a USB device for playback of multimedia files
3.5 mm female jack entry for composite video and left/right audio
connection.
Connect YPbPr sources.
Press to turn the TV on or standby.
Press to mute or restore the volume.
Press to go back to Digital TV.
Change aspect ratio.
Change picture mode.
Fig. 2
Fig. 3
Fig. 4
5