Page 1
LED TV with DVB-T/T2/C/S/S2 SRT 32HY3003 Инструкции за употреба Gebruiksaanwijzing Uživatelská příručka Instrukcja obsługi Bedienungsanleitung Manual do Utilizador User Manual Руководство пользователя Manual del Usuario Používateľská príručka Manuel utilisateur Navodila za uporabo Εγχειρίδιο Χρήσης Посібник користувача Használati útmutató Korisnički priručnik...
Page 4
Supplied by STRONG & Co, Japan Represented by STRONG Ges.m.b.H. Franz-Josefs-Kai 1 1010 Vienna, Austria Email: support_at@strong.tv 10 Apr 2018 08:08...
Page 5
Licenses ANY USE OF THIS PRODUCT IN ANY MANNER OTHER THAN PERSONAL USE THAT COMPLIES WITH THE MPEG-2 STANDARD FOR ENCODING VIDEO INFORMATION FOR PACKAGED MEDIA IS EXPRESSLY PROHIBITED WITHOUT A LICENSE UNDER APPLICABLE PATENTS IN THE MPEG-2 PATENT PORTFOLIO, WHICH LICENSE IS AVAILABLE FROM MPEG LA, LLC, 6312 S.
7.0 TROUBLESHOOTING 8.0 SPECIFICATIONS STRONG declares that the equipment complies with the European Directive 2014/30/EU (EMC) and the Low Voltage Directive 2014/35/ EU (LVD) and the ErP Directive 2009/125/EC and the RoHS Directive 2011/65/EU in accordance with the following technical standards: ELECTROMAGNETIC COMPATIBILITY EN 55032:2012;...
1.0 INSTRUCTION 1.1 Safety Instructions Read all of the instructions before operating the set. Keep these instructions well for later use. Only use attachments/accessories specified or provided by the manufacturer (such as the exclusive supply adapter, battery etc.). Please refer to the information on the exterior back enclosure for electrical and safety ...
Do not attach candle to accessible opening area, to avoid flammable foreign material from entering the TV. 1.2 WEEE Directive Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
5. Guide To toggle the Electronic Programme Guide on or off (only available for digital channels). 6. Menu To access the main menu; to return to the previous menu. 7. Exit To exit the menu structure or Teletext. 8. pq To navigate in the main menu;...
Do not place the remote control under direct sunlight which will cause deformation of the unit by heat. When the remote sensor is under direct sunlight or strong lighting, the remote control will not work. If so, please change the lighting or TV's position, or operate the remote control closer to the remote sensor.
Press t u to select Free to search Free-To-Air channels only, Scrambled Channel Type to search scrambled channels only or Free+Scramble to search FTA and Encrypted channels. Press t u to select DTV to search video channels only, Radio to search radio Service Type channels only or All to search both.
5.2 Channel menu Press Menu to display the main menu. The Channel menu is the first that appears. Press pq to select the option you wish to adjust in the Channel menu. Press OK to adjust. After finish your adjustment, press OK to save and return to the previous menu. 5.2.1 Auto Tuning Press pq to select Auto Tuning, then set the Tuning Setup menu according to your needs and proceed with OK.
5.2.6 Channel settings Edit the programmes. You can press the COLOUR BUTTONS on the remote Programme Edit control to skip programmes, rename and delete programmes or move programmes. Press pq in the Channel. Select Schedule List, then press OK to enter the sub- Schedule List menu.
Select to turn off video noise detection. Detect and reduce low video noise. Middle Detect and reduce moderate video noise. Detect and reduce enhanced video noise. High Default Set as Default. 5.3.4 HDMI Mode In this menu, you can select between: Auto, PC and Video NOTE: Only available if the TV is connected to an external device (e.g.
5.5 Time menu Press Menu to display the main menu. Press t u to select Time in the main menu. Press p q to do further adjustments. Press OK to return to the previous menu. Clock The time is automatically obtained from the channel transmission and doesn’t have to be set manually.
Set the default channel when the TV device is switched On (but only if Default Prog Satellite, DVB-T or DVB-C are selected as Default Source). Define the default volume when the TV device is switched on. Default Volume Max Volume Define the maximum volume setting.
2. Back up all of the data in the USB storage device in case data is lost due to an unexpected accident. STRONG does not assume any liability for the losses by misuse or malfunction. Data backup is consumer's responsibility.
and use the number buttons to insert the time. Press OK, the TV will start playing from the set time. Highlight the button and press OK to select the display mode. Aspect Ratio 6.2.2 Play music Fig. 7 Press INFO to display/exit from the menu bar (Fig. 7). Press the USB control buttons on the remote control to do relevant operations.
Before calling a service technician, review following information for possible causes and solutions for the problem you are experiencing. If the TV does not work properly after checking it, please contact your local service line or STRONG dealer. Alternatively you can send a support mail via our website www.strong.tv.
Page 21
Satellite dish is too small, trees or buildings in path. Change to a larger dish or change position of dish. d) Signal is too strong, dish is oversized. Connect a signal attenuator to the LNB input. Ask a local satellite specialist for advice.
NOTE: If the problem persists after these solutions, please contact your local support centre or send a support mail via our website www.strong.tv. 8.0 SPECIFICATIONS Audio Audio Output: 5 W + 5 W Video Channel coverage: DVB-T/T2:174 MHz-230 MHz; 470 MHz-860 MHz...
Need help?
Do you have a question about the SRT 32HY3003 and is the answer not in the manual?
Questions and answers