Specifications - Strong SRT 24HA3003 User Manual

Problem
Normal picture, no sound
Playback of video is
causing picture freeze/
macro blocks or similar
distortion, especially on
HD content.
The remote control does
not work
The TV switches off after a
certain time
NOTE:

8.0 SPECIFICATIONS

Audio
Audio Output:
Video
Channel coverage:
System:
Connectors
1x ANT/CABLE IN
1x PC audio in
1x SAT IN
1x HDMI
1x SCART
1x USB
1x S/PDIF (coax.)
1x VGA
Possible cause and solution
1. Press the volume up button to increase the volume level.
2. Audio is muted, press ! to restore the sound.
3. If external devices are used to loop the sound through, make
sure to select correct sources and correct sound mode, for details
also check advices in User Manuals from connected devices
4. Maybe a channel w/o audio is tuned to (demo) or the
programme is not transmitting audio signals or there is some
other transmission interference/failure.
Read/write speed of your USB device could be too low. Make sure to use
a USB storage device with sufficient speed and space. Pen drives (USB
sticks) may not support sufficient speed.
1. hange the batteries. If you're using rechargable ones take care to
use such with low self-discharge
2. The batteries are not installed correctly or the types have been
mixed
3. IR Sensor is blocked or maybe interfered from bright light
Switch ON the TV and check settings for automatic STBY function, by
default the TV switches OFF after 4 hours to fulfil European low power
regulations and help you to save energy.
If the problem persists after these solutions, please contact your local
support centre or send a support mail via our website www.strong.tv.
3 W + 3 W
DVB-T2: 174 MHz-230 MHz; 470 MHz-860 MHz
DVB-C: 50-858 MHz
DVB-S2: 950 MHz-2150 MHz
DTV: DVB-T2, DVB-S2, DVB-C
ATV: PAL/SECAM (BG/DK/1)
AV: PAL, NTSC
17