1. Power indicator /remote sensor
2. Speakers
3. Buttons: Input source, Menu, V-/V+, CH-/CH+, Standby/ON.
4. Power switch ON/OFF
2.3 Rear panel
NOTE:
1. AC INPUT (FIXED CABLE)
2. VIDEO/AUDIO L/R
3. S/PDIF(coax. output)
4. SCART
2.4 Side panel
NOTE:
2.4.1
1. ANT/CABLE IN
2. SAT IN
3. YPbPr
4. CI+
5. HEADPHONE
6. HDMI 1
7. VGA
8. HDMI 2 (ARC)
9. USB
2.5 Remote control
1. !
2. q
The graphics are for representation only.
Main power cable (100 - 240 V ~ 50/60 Hz)
Connect AUDIO and VIDEO input signals from a signal source such as DVD.
Use an RCA cable to connect your TV to a compatible digital amplifier or
Home theatre set.
Connect devices like DVD or VCR using SCART cable
The graphics are for representation only.
Connect a terrestrial antenna or cable connection from your provider to the
TV for searching programmes.
Connect a satellite dish to the TV for searching programmes.
Connect YPbPr sources.
Connect a Conditional Access Module (CAM).
Speakers will be muted when earphone is plugged in and headphone
selected.
Connect HDMI input signal from a signal source such as DVD, Blu-ray player or
game console.
Connect a VGA source computers may have
Connect HDMI input signal from a signal source such as DVD, Blu-ray player
or game console or directly to a Digital Amplifier that supports the ARC
function. This input is equipped with the ARC (Audio Return Channel) feature
to implement audio connections and for a full Dolby audio support.
Connect a USB device for playback of multimedia files
Press to mute or restore the volume.
Press to turn the TV on or standby.
Fig. 3
Fig. 3
Fig. 4
5