Usb Menu - Strong SRT 24HA3003 User Manual

Back up all of the data in the USB storage device in case data is lost due to an unexpected accident.
STRONG does not assume any liability for the losses by misuse or malfunction. Data backup is
consumer's responsibility.
For large file sizes, the loading speed may be slightly longer.
The recognition speed of a USB storage device may depend on each device.
When connecting or disconnecting the USB storage device, make sure the TV is not in USB mode
otherwise the USB storage device or the files stored in it may be damaged.
Please use only a USB storage device which is formatted in FAT16, FAT32, NTFS (playback only) file
system provided with the Windows operating system. In case of a storage device formatted as a different
utility programme which is not supported by Windows, it may not be recognized.
When using a USB Hard Disk Drive which is not powered independently, ensure its power does not
exceed 500 mA. Otherwise the TV system will change into standby mode, and you must pull out the USB
Hard Disk and restart the TV system.
An "Unsupported File" message will be displayed if the file format is unsupported or the file is corrupted.
FHD big picture needs longer time to process, which is not caused by the TV. Please be patient.
This TV may not support some multimedia files changed and upgraded as the change of the encoding
format or other technical aspects advances.

6.2 USB menu

Press SOURCE and select Media. You can view movie, music and photo files from your USB storage
devices. Connect a USB storage device to the USB input terminal and select the types of media on the
home page: Movie, Music, Photo and text. Press ENTER, the screen will show the connected USB device,
press ENTER again to view the file folders and files. Press pq or t u to select a folder, press ENTER to
open the folder and select the files. Highlight the one you want to play or watch or press directly u 2
to start playing directly. Press 3 to stop playing and return to upper lever folder. Continuously press
RETURN to go back to upper level folder. Repeat again to select and play another media type.
NOTE:
6.2.1 Play movies
During playback, press INFO or ENTER to display/exit the menu bar (Fig. 6). Press the USB control
buttons on the remote control to do relevant operations.
Play & Pause/Stop/Prev./Next
Fast Reverse/Fast Forward Press and hold 5 6 for seconds to draw the playing progress as your desire,
Play Mode
By choosing one of the three media types, for example Movie, the folders
inside will display only video files and no other formats.
Press u 2 to play or pause the playback. Press 3 to stop playing. Press
7 8 to play the previous or the next video file. Press INFO and use t u to
highlight the corresponding icon on the control bar, then press ENTER. The
TV will response accordingly.
then press u 2 to start the playing from the new position.
Highlight the corresponding icon and press ENTER to switch to another play
mode.
Fig. 6
13