First Time Installation; Dvb-S/S2 Installation; Dvb-T/T2 Installation - Strong SRT 24HA3003 User Manual

Led tv with dvb-t2/c/s2
Table of Contents

Advertisement

2. Do not cause the remote control to vibrate violently. Also, do not splash liquid on the remote
control, also do not put the remote control in a high humidity place.
3. Do not place the remote control under direct sunlight which will cause deformation of the unit
by heat.
4. When the remote sensor is under direct sunlight or strong lighting, the remote control will not
work. If so, please change the lighting or TV's position, or operate the remote control closer to
the remote sensor.

3.0 FIRST TIME INSTALLATION

After all connections have been properly made, switch on your TV. The language selection will appear
on screen. Use t u to select the OSD Language of your preference. Press q and then use t u to select
the country where you will use this TV. This is important to set settings as time zone and text character
correctly. Press q to change Environment from Home to Shop modus to demonstration TV in shop,
otherwise keep as it is.
Press ENTER for next step to go to Tuning setup.
In Tuner setup selection you select which tuner input source you like to use.
Digital type
Tune Type
Next step is depending of your choice in Tuner setup.

3.1 DVB-S/S2 installation

Satellite
Press q to select Satellite and use t u to highlight the satellite your dish is aimed at. Use pq t u to
highlight the options of choice and press ENTER to start the channel search.
Scan Mode
Channel type
Service Type
It is recommended to use the default settings.

3.2 DVB-T/T2 installation

Terrestrial Setting
Press ENTER to start directly searching for digital channels.
Optional you can search also for analogue channels.
Press p and select the Tune Type.
By pressing t u select DTV, ATV or DTV+ATV (DTV to search digital broadcasts and ATV to search
analogue broadcasts).
DVB-S to receive satellite broadcasts if you are equipped with a satellite dish),
DVB-T to receive terrestrial broadcasts with indoor or outdoor antenna.
DVB-C to receive cable broadcasts if you have cable connection from local
provider.
If you still have analogue signals in DVB-T or DVB-C. Select here between
options of Digital /+ Analogue systems.
Choose between Default (recommended), Blind Scan and Network
Select Free to search Free-To-Air channels only or Free + Scrambled to search
FTA and Encrypted channels.
Select All to search DTV channels and Radio. Select RADIO to search radio
channels only or DTV for only Digital TV channels.
7

Advertisement

Table of Contents
loading

Table of Contents