Connecting to
the IO Block
(Orange Dongle)
To Connect to the IO
Block (Orange
Dongle)
•
UX700 ML device can now be connected to the stand base as shown in
7-4.
•
Tighten the screws as shown in
stand base as shown in
•
Close the cover of the stand base and tighten the two screws below the stand
base as shown in
Figure
Figure 7
Mounting the UX700 ML
IO Block (Orange Dongle) can be ordered separately. There are four ports on the
IO block (Orange Dongle), two LAN ports, one charging port, and a USB-C port to
insert the orange cable.
•
Connect one end of the cable (Orange Cable) to the IO block (Orange Dongle)
as shown in
Figure
•
Rotate the cable screw clockwise as shown in
•
Connect the other end of the cable to the UX700 ML device.
Figure
7-5 (A), and put the cover back to the
Figure
7-5 (B).
7-6.
8-A.
Connecting to the IO Block (Orange Dongle)
Figure
8-B.
UX700 ML I
NSTALLATION
S
ETUP
Figure
15
G
UIDE