Connection Ports; Connecting Cables And Other Devices - VeriFone T650T Installation Manual

D S
EVICE ETUP

Connection Ports

Connection
Ports
Connecting Cables
and Other Devices
14
T650T I
NSTALLATION
•
A smart card reader is built into the front of the device to process smart card-
based debit or credit transactions. For directions on how to use a smart card,
see Using the Smart Card
•
A magnetic card reader is built into the device for performing debit or credit
card transactions. The card can be swiped in either direction. To ensure a
proper read of the magnetic swipe card, insert the magnetic card from the side
of the device as shown in
•
Contactless Reader and EMV have dedicated LEDs lower to the left of the
display for contactless payments. For directions on how to perform contactless
transactions, see
•
A 3.5 mm audio jack to facilitate accessibility for the visually impaired.
The device has dedicated input/output connectors: Ethernet, RS-232, USB-A,
USB-C and DC power.
To connect required cables and other devices:
1
Remove cable cover as shown below.
Removing Cable Cover
Figure 3
G
UIDE
Reader.
Figure 14.
Using the Contactless Reader.