Table of Contents
Advertisement
Connecting the
Antenna Unit to
the Controller
Unit
NOTE
To connect units
NOTE
Contactless Support
Use the following cables to connect the Antenna Unit to the Controller Unit:
•
RJ45 to RJ45 (VPN CBL159-314-01-A)
•
SMA cable, 0.8 m (VPN CBL159-302-03-A)
For EMVCo L1 compliance, please use the provided cables.
Both connections are necessary for using the UX 410 to operate.
1
Connect one end of the RJ45 plug to the rear of the Antenna and the other
end to the Controller Units.
2
Connect one end of the SMA connector to the ports of the Antenna and the
other end to the Controller Units.
Connecting the UX 410 Antenna to the Controller Unit
Figure 7
To disconnect cables, use the same steps described above in reverse. If
exchanging cables, use a Verifone-approved cable. See
Documentation
for cable ordering information.
This Antenna Unit supports the global contactless program specifications from
American Express, MasterCard, Visa, Discover, ISIS SmartTap, and Google
Wallet with virtually no changes to existing payment hardware or software.
Connecting the Antenna Unit to the Controller Unit
RJ45
SMA
SMA
X
X
RJ45
Accessories and
UX 410 I
G
NSTALLATION
UIDE
S
ETUP
15
Advertisement
Table of Contents
