Connecting To A Computer; Conducting Wireless Transactions; Using The Smart Card Reader - VeriFone E235 Installation Manual

D S
EVICE ETUP

Connecting to a Computer

Connecting to a
Computer
Conducting
Wireless
Transactions
Using the Smart
Card Reader
20
235 I
E NSTALLATION
2
Insert the Micro-USB cable into the port located on the side of the e235.
Figure 5 Connecting the e235 to a Wall-mount Charger
Connect the e235 device to a PC or laptop to download applications.
1
Insert the USB-C plug into the USB-C port of the e235 device.
2
Connect the other end of the USB-C plug into the host computer's USB port.
To conduct a wireless transaction:
•
Ensure that the device is in an optimal position for transmission.
•
Follow the on-screen instructions provided with your application.
The smart card transaction procedure may vary from one application to another.
Verify the procedure with your application provider before performing a smart card
transaction.
1
Position the smart card with the contacts facing upward (see illustration
below).
2
Insert the card into the reader slot in a smooth, continuous motion until it seats
firmly.
G
UIDE