Table of Contents
Advertisement
Selecting Unit
Location
Choosing Mounting
Location
NOTE
Unpacking the
Shipping Carton
To Unpack the
Shipping Carton
WARNING
Periodic Inspection
Use the following guidelines when selecting a location for your device.
•
Select a location convenient for the customer.
•
Avoid dusty, hot, or damp locations.
•
To minimize data reading or writing errors, pick a location free from magnetic
interference. Choose a spot a safe distance away from objects or units that
generate magnetism.
Choose a mounting location that has good access to both card insertion into the
chip reader and has enough space to swipe the card through the MSR reader.
The front panel of the device meets the IP53 standards.
Open the shipping carton and carefully inspect its contents for possible tampering
or shipping damage. The device is a secure product. Tampering causes it to
cease to function or to operate in an unsecured manner. See how to identify signs
of tampering in section
1
Validate the authenticity of the sender by verifying the shipping tracking
number and other information located on the product order paperwork.
2
Remove and inspect the shipping carton box. The carton box includes the
following:
•
Device
•
2 screws
3
Remove all plastic wrapping from the device and components.
4
Remove the clear protective film from the display.
5
Save the shipping carton and packing material for future repacking or moving
of the device.
Ne pas utiliser un appareil qui a été altéré ou endommagé. Cet appareil est
équipé d'étiquette d'inviolabilité. Si une étiquette ou d'un composant semble être
endommagé, en aviser immédiatement la compagnie maritime et votre
représentant Verifone ou prestataire de services.
Do not use a tampered or damaged unit. The device comes equipped with
tamper-evident labels. If a label or component appears damaged, please notify
the shipping company and your Verifone service provider immediately.
Periodically inspect the terminal for possible tampering. Signs of tampering
include:
•
Wires protruding out of the device.
•
Foreign objects inserted into the smart card slot or magnetic stripe slot.
Periodic
Inspection.
Selecting Unit Location
UX700 ML I
G
NSTALLATION
UIDE
S
ETUP
11
Advertisement
Table of Contents
