Inspecting the
Connection Port
To Connect the
Terminal Power
Supply
•
Any bumps in the casing below the mag stripe slot and any noticeable
additional mag stripe head from the side.
•
Signs of damage to the tamper-evident labels.
•
A Tamper Warning message on the device display.
If any device is found to have been tampered with, please remove it from service
immediately, keep it available for a potential forensics' investigation, and notify
your company security officer and your local Verifone representative or service
provider. To contact Verifone, please see
The device has dedicated port that routes down to connect to the IO block
(Orange Dongle).
The UX700 ML device can be powered from two different PSUs used in different
connection modes. One from IO HUB (PWR159-002-01-B (4pin plug)) and
another from IO block (Orange Dongle) (PWR445-001-01-A (DC jack)). The
cables used for IO HUB and IO Block (Orange Dongle) are CBL900-003-01-A and
CBL184-700-05-A (Orange Cable) respectively.
Inspecting the Connection Port
Verifone Service and
Support.
UX700 ML I
NSTALLATION
S
ETUP
12
G
UIDE