Table of Contents
Advertisement
Handling and Control
Timer
Timer
The Timer feature from the menu bar enables the user to turn the incubator on and off at
scheduled times. The timer supports three different modes of operation, depending on the
user's preferences:
• Countdown-type on or off timer: Turns the incubator on or off after a user-specified
period of time. Instructions on setting the preferences for this option are given in
below, while its use as an off timer and on timer are described in
table 7-7 on page
• Fixed-time on or off timer: Turns the incubator on or off at a scheduled time. Instructions
on setting the preferences for this option are given in
and on timer are described in
respectively.
• Weekly timer: Turns the incubator on or off at scheduled times on specific days of the
week. The process for setting the preferences for this option is described in
while instructions for programming the daily turn-on and turn-off times are given in
table 7-12 on page
Programming a turn-on time causes the incubator to shut down until it is scheduled to restart,
while a turn-off time keeps it running before it shuts down at the user-specified time. The
timer starts running immediately as soon as the user confirms his or her entries.
The decontamination routine overrides timer schedules, that is, a pre-programmed timer will
not start before decontamination is finished.
Table 7-5 Presetting the Countdown Timer Mode of Operation
2010-04-12 10:14
7-8
Heratherm
7-9, respectively.
7-11.
Press
select the Settings icon and press
Press
confirm the selection with
Press
PM
Settings
as the mode of your choice, then use
Timer
Count Down
the selection.
The display returns to its default mode.
table 7-9 on page 7-10
to activate the menu bar, then use
to switch to the Timer menu item and
or
to preselect the Countdown timer
table 7-6 on page 7-9
table
7-8, while its use as an off timer
and
table 7-10 on page
to confirm.
.
to confirm
Thermo Scientific
table 7-5
and
7-10,
table
7-11,
to
Advertisement
Table of Contents
