Table of Contents
Advertisement
GAS BURNERS
Gas flow to the burners is adjusted by
turning the knobs (illustrated in fig. 1.2)
which control the safety valves.
Turning the knob, so that the indicator line
points to the symbols printed on the panel,
achieves the following functions:
– symbol
– symbol
– symbol
•
The
maximum
permits rapid boiling of liquids, whereas
the minimum aperture position allows
slower warming of food or maintaining
boiling conditions of liquids.
•
To reduce the gas flow to minimum
rotate the knob further anti-clockwise
to point the indicator towards the small
flame symbol.
•
Other
intermediate
adjustments can be achieved by
positioning the indicator between the
maximum and minimum aperture
positions, and never between the
maximum
aperture
positions.
N.B. When the cooktop is not being
used, set the gas knobs to their
closed positions and also close the
cock valve on the gas bottle or the
main gas supply line.
Caution!
The cooking hob becomes very hot
during operation.
Keep children well out of reach.
closed valve
maximum
aperture or flow
minimum
aperture or flow
aperture
position
operating
and
closed
Fig. 1.2
NOTE:
The knob and symbols may vary.
Fig. 1.3
Caution!
Do not cover the hob with aluminium
foils.
19
Advertisement
Table of Contents
