Winding The Bobbin Thread - Bernina 700 User Manual

Embroidery Preparation
> Pull the thread beneath the presser foot from back to front over the thread cutter (15) and cut.

Winding the bobbin thread

The bobbin thread can be wound while embroidering if the swiveling spool holder is used for winding.
Prerequisite:
•
> Place the empty bobbin on the Winding Unit (1) so that the silvery sensor surface is down.
> Guide the thread to the left into the rear thread guide (2).
> Guide the thread around the bobbin winder pretension clockwise (3).
> Wind the thread clockwise 2 – 3 times around the empty bobbin (4).
> Pull the excess thread over the thread cutter at the engaging lever (5) and cut.
40
15
The foam pad, the thread spool and the appropriate spool disc are fitted.
2
3
1
4
5