Bernina 700 User Manual page 65

> Tap «Confirm».
1
> Tap «i-Dialog».
> Tap «Embroidery».
> Press the button «Start/Stop» and embroider the trim.
– The embroidery design must be embroidered already.
> After the reference points have been embroidered, tap «Endless Embroidery».
– An animation displays that the fabric has to be re-clamped.
> Remove the hoop and spin the fabric in such a way that the embroidered reference points are in the
upper embroidery field of the hoop and the reference points are located at least 3 cm (1.18 inch) away
from the upper edge of the hoop.
> Attach the hoop.
> Tap «Confirm».
– The hoop is automatically moved close to the reference point.
– The icon «AUTO» is active and the hoop automatically moves close to the last reference point.
> Use the arrow icons to determine the side of the embroidered section on which you want to position the
next reference point.
2
3
4
Creative Embroidering
65