Administering Embroidery Designs; Saving Embroidery Designs In The Personal Memory - Bernina 700 User Manual

Hide thumbs Also See for 700:
Table of Contents

Advertisement

A fabric tube can be conveniently placed around the freearm of the machine if the embroidery hoop is
moved to the left into the park position before attaching or removing it. To return the hoop to the
embroidery position afterwards, push the button «Start/Stop».
If possible, use a full bobbin as the embroidery hoop must be removed when the bobbin is changed.
Borders can be closed easily and exactly along the edge of the tube to form a ring. Before working out
the last embroidery design, after rehooping the fabric, activate the function «Pinpoint Placement» in the
Edit Mode. Use the sub-function «Free Point Positioning» to insert the missing embroidery design for a
perfect fit.
The movability of the embroidery arm can be limited or impeded with very narrow tubes. Therefore please
make sure that the embroidery hoop can move forwards and backwards sufficiently. An impediment of the
embroidery arm caused by a tube which is too tight can result in embroidery design offset or in damaging
the fabric.
Check the Movability of the Freearm
Please note: With tiny fabric tubes, deactivate the thread-away in the Setup Program if necessary.
> Open the embroidery design on the machine and edit as desired.
> Mark the embroidery design position and the size on the fabric in a suitable way.
> Select the embroidery hoop as small as possible.
> Hoop or stick the fabric along with the appropriate stabilizer in the embroidery hoop, depending on the
stabilizer.
> Pull the fabric tube carefully over the freearm of the machine and attach the embroidery hoop at the
clutch of the embroidery module.
> If necessary, reposition the embroidery design.
> Tap «Check Embroidery Design Size».
check
> After the successful check of the embroidery design size, start the embroidery process.

5.12 Administering Embroidery Designs

Administering Embroidery Designs
1
«Loading the Embroidery Design»
2
«Adding an Embroidery Design»

Saving Embroidery Designs in the Personal Memory

In the file «Save Embroidery Designs» any embroidery designs including individually edited embroidery
designs can be saved.
> Select the embroidery design.
> Edit the embroidery design.
> Tap «Selection».
1
2
3
4
3
«Save Embroidery Design»
4
«Deleting an Embroidery Design»
Creative Embroidering
79

Advertisement

Table of Contents
loading

This manual is also suitable for:

700 e

Table of Contents