Threading The Triple Needle; Winding The Bobbin Thread - Bernina 435 User Manual

Sewing Preparation
> Thread the second thread manually into the left needle.

Threading the Triple Needle

Prerequisite:
•
> Place the foam pad, the thread spool and the appropriate spool cap on the horizontal spool pin.
> Place the foam pad on the vertical spool pin.
> Attach the filled bobbin on the vertical spool pin so that the silvery sensor surface is down.
> Attach the thread spool in the opposite direction to the bobbin.
> Thread the 3 threads up to the upper thread guide.
> Guide 2 threads (vertical spool pin) past the thread tension disc (1) on the left and up to the thread guide
> Guide 1 thread (horizontal spool pin) past the thread tension disc (1) on the right and up to the thread
> Thread 1 thread of the vertical thread spool pin into the left and right needle by hand.
> Thread the thread of the horizontal spool pin into the center needle manually.

Winding the Bobbin Thread

The bobbin thread can be wound while sewing when the retractable spool pin is used for winding.
Prerequisite:
•
> Attach the empty bobbin on the winding unit so that the silvery sensor surface is down.
> Guide the thread to the left into the rear thread guide (1).
40
The triple needle is inserted.
1
above the needle.
guide above the needle.
The foam pad, the thread spool and the appropriate spool cap are fitted.