Setup Program
Adjusting the Sewing Light
The brightness of the sewing light can be adjusted corresponding to the personal preferences.
> Tap «Setup Program».
> Tap «Machine Settings».
> Tap «Display Settings».
> Adjust the brightness of the sewing light in the lower section of the screen.
> Tap the switch to switch the sewing light off.
> Tap the switch again to switch the sewing light on.
Calibrating the Display
You will find more information on this topic in the chapter "Troubleshooting". (see page 89)
> Tap «Setup Program».
> Tap «Machine Settings».
> Tap «Calibrating the Screen».
> Touch the crosses in sequence using the touchscreen pen.
Back to basic setting
CAUTION: Using this function will delete all individually made settings.
> Tap «Setup Program».
> Tap «Machine Settings».
> Tap «Factory Setting».
> Tap the «Default Setting Embroidering», confirm and start the machine again.
Deleting user data
> Tap «Setup Program».
> Tap «Machine Settings».
> Tap «Factory Setting».
> Tap «Delete Personal Embroidery Designs» and confirm.
55