Table of Contents
Advertisement
Threading the triple needle
Prerequisite:
•
The triple needle is inserted.
> Place the foam pad, the thread spool and the appropriate spool disc on the spool holder.
> Place the filled bobbin on the swiveling spool holder.
> Fit the appropriate thread disc.
> Place the thread spool.
> Thread the 3 threads up to the upper thread guide.
> Guide 2 threads past the thread tension discs (1) on the left and to the thread guide above the needle.
> Guide 1 thread past the thread tension discs (1) on the right and to the thread guide above the needle.
> Thread the first thread into the left needle manually.
> Thread the second thread into the center needle manually.
> Thread the third thread into the right needle manually.
Winding the bobbin thread
The bobbin thread can be wound while embroidering if the swiveling spool holder is used for winding.
Prerequisite:
•
The foam pad, the thread spool and the appropriate spool disc are fitted.
> Place the empty bobbin on the Winding Unit (1) so that the silvery sensor surface is down.
> Guide the thread to the left into the rear thread guide (2).
> Guide the thread around the bobbin winder pretension clockwise (3).
> Wind the thread clockwise 2 – 3 times around the empty bobbin (4).
2
3
1
1
4
Sewing preparation
45
Advertisement
Table of Contents
