Changing The Measuring Unit; Selecting Personal Settings; Monitoring Functions; Activating The Upper Thread Indicator - Bernina 700 User Manual

> Tap the switch in the middle section of the display (2) so that the machine will stop after about 7 stitches
and the remaining thread can be cut manually.
> Tap the switch in the middle section of the display (2) again and the machine won't stop for a manual
thread cut.
> To adjust the length from where the connecting stitches are cut, tap «Minus» or «Plus» (3).

Changing the measuring unit

The measuring unit in the Embroidery Mode can be changed from mm to inch. The standard setting is in
mm.
> Tap «Setup Program».
> Tap «Embroidery Settings».
> Tap «Measuring Unit».
> To display the measurements in the Embroidery Mode in inch, tap «inch».
> To display the measurements in the Embroidery Mode in mm, tap «mm».

3.2 Selecting personal settings

> Tap «Setup Program».
> Tap «Personal Settings».
> Select the required display color and background.
> Tap the text box above the color settings.
> Enter and confirm the welcome text.

3.3 Monitoring Functions

Activating the Upper Thread Indicator

> Tap «Setup Program».
> Tap «Monitoring Functions».
> Tap the switch in the upper section of the display to deactivate the upper thread indicator.
> Tap the switch again to activate the upper thread indicator.

Activating the Bobbin Thread Indicator

> Tap «Setup Program».
> Tap «Monitoring Functions».
> Tap the switch in the lower section of the display to deactivate the bobbin thread indicator.
> Tap the switch again to activate the bobbin thread indicator.
Setup Program
53