Duplicating The Embroidery Motif; Deleting An Embroidery Design; Changing The Sequence Within An Embroidery Motif Combination - Bernina 700 User Manual

Creative Embroidering
> To position the embroidery hoop precisely, turn the «Upper Multi-function Knob» or «Lower Multi-
> Tap «Confirm».
> Press the button «Start/Stop» and continue embroidering.
> Repeat these steps until the required length of the trim has been achieved.

Duplicating the embroidery motif

> Select an embroidery motif.
> Tap «i-Dialog».
> Tap «Duplicating».

Deleting an Embroidery Design

The active embroidery design is deleted.
> Select the embroidery design.
> Tap «i-Dialog».
> Tap «Deleting».

Changing the sequence within an embroidery motif combination

The sequence of the embroidery motifs in the embroidery motif combination can be changed.
Prerequisite:
•
> Tap «i-Dialog».
> Tap «Change Embroidery Motif Sequence».
1
2
3 > Select the required embroidery motif and move it to the corresponding position.
66
function Knob».
– The embroidery motif (1) is duplicated (2).
The embroidery motif combination has been created or the motif has been ungrouped.
2
1