Installation; Wall Mounting - Eneo DOME-WB8 Quick Installation Manual

INSTALLATION

Wall Mounting

IND-5xx / MED-5xx
1� Attach the drilling template to the installation position and drill into the wall�
2� Hammer the 4 dowels into the drilled holes in the wall�
3� Remove the installation plate from the connection box and screw the plate to
the mounting base with 4 screws�
4� Feed the power and BNC cable through the box�
5� Fix the box to the wall on the mounting plate and tighten the screws of the box
base to fix the box to the wall�
6� Connect the power and BNC cables to the camera cables�
7� Unscrew the base of the Turret and attach the base to the connection box�
8� Screw the housing and the dome of the Turret into the base, adjust the viewing
angle at the same time�
8