Advertisement
ULTRA CLEAR RESOLUTION CAMERA
Installation Instructions
1. Locate the mounting template at the installation position and drill the ceiling or wall if
needed. ( *The easy bracket can not be installed on the ceiling)
2. Place the easy bracket on pre-drilled position and fix it through using mounting screws
(4x30mm). Skip this step when an easy bracket is not installed.
3. Route the Power cable to the connecting place.
Hook up the camera bracket with the easy bracket as illustrated below.
4. Fix the camera bracket through using assembly screws (4x14mm).
5. Set the camera's viewing angle and adjust zoom/focus of lens by using the torque wrench.
Assembly Screw
Torque Wrench
Mounting Screw
: 4x14mm
4
REAR VIEW
: 4x30mm
2
09
1
3
Cable exit
Advertisement
