SAFETY INSTRUCTIONS General • Before switching on and operating the system, first read this safety advice and the operating instructions� • Keep the operating instructions in a safe place for later use� • Installation, commissioning and maintenance of the system may only be carried out by authorised individuals and in accordance with the installation instructions - ensuring that all applicable standards and guidelines are followed�...
Page 6
WEEE (Waste Electronical & Electronic Equipment) Correct Disposal of This Product (Applicable in the European Union and other European countries with separate collection systems)� This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life�...
PRIOR TO USE • Install the mount onto a strong structure such as concrete wall • Use the supplied accessories when installing the mount bracket depends on mounting position Dimensions (in mm) & Specifications Construction: Aluminum Cast Dimensions(mm): 163,72 x 186,80 x 75,00 Weight: 761,00 g (1�68 lb) Parts supplied...
INSTALLATION Wall Mounting IND-5xx / MED-5xx 1� Attach the drilling template to the installation position and drill into the wall� 2� Hammer the 4 dowels into the drilled holes in the wall� 3� Remove the installation plate from the connection box and screw the plate to the mounting base with 4 screws�...
Page 9
IND-6xx 1� Attach the drilling template to the installation position and drill into the wall� 2� Hammer the 4 dowels into the drilled holes in the wall� 3� Remove the installation plate from the connection box and screw the plate to the mounting base with 4 screws�...
Page 10
INP-54M2812MOA 1� Attach the drilling template to the installation position and drill into the wall� 2� Hammer the 4 dowels into the drilled holes in the wall� 3� Remove the installation plate from the connection box and screw the plate to the mounting base with 4 screws�...
SICHERHEITSHINWEISE Allgemein • Bevor Sie das System anschließen und in Betrieb nehmen, lesen Sie zuerst diese Sicherheitshinweise und die Betriebsanleitung� • Bewahren Sie die Betriebsanleitung sorgfältig zur späteren Verwendung auf� • Montage, Inbetriebnahme und Wartung des Systems darf nur durch dafür autorisierte Personen vorgenom- men und entsprechend den Installationsanweisungen - unter Beachtung aller mitgeltenden Normen und Richtlinien - durchgeführt werden�...
Page 14
WEEE-Richtlinie (Elektro- und Elektronik-Altgeräte) Ordnungsgemäße Entsorgung dieses Produkts (Gilt für die Europäische Union und die anderen Europäischen Länder mit getrennten Sammelsystemen) Dieses am Produkt oder in seiner Dokumentation gezeigte Symbol bedeutet, dass es am Ende seiner Lebensdauer nicht mit dem Hausmüll entsorgt werden darf� Um eventuelle Umwelt- oder Gesund- heitsschäden durch unkontrollierte Abfallbeseitigung zu verhindern, dieses Gerät von anderen Ab- fallarten trennen und ordnungsgemäß...
VOR DEM GEBRAUCH • Die Anschlussbox an einer tragfähigen Struktur wie z� B� einer Betonwand befestigen� • Verwenden Sie bei der Montage der Halterung je nach Montageposition das mitgelief- erte Zubehör Abmessungen (in mm) & Spezifikationen Ausführung: Aluminiumguss Abmessungen(mm): 163,72 x 186,80 x 75,00 Gewicht: 761,00 g Lieferumfang...
INSTALLATION Wall Mounting IND-5xx / MED-5xx 1� Bringen Sie die Bohrschablone an der Einbauposition an und bohren Sie in die Wand� 2� Hämmern Sie die 4 Dübel in die gebohrten Löcher in der Wand� 3� Entfernen Sie die Installationsplatte von der Anschlussbox und schrauben Sie die Platte mit 4 Schrauben an der Montageunterlage fest�...
Page 17
IND-6xx 1� Bringen Sie die Bohrschablone an der Einbauposition an und bohren Sie in die Wand� 2� Hämmern Sie die 4 Dübel in die gebohrten Löcher in der Wand� 3� Entfernen Sie die Installationsplatte von der Anschlussbox und schrauben Sie die Platte mit 4 Schrauben an der Montageunterlage fest�...
Page 18
INP-54M2812MOA 1� Bringen Sie die Bohrschablone an der Einbauposition an und bohren Sie in die Wand� 2� Hämmern Sie die 4 Dübel in die gebohrten Löcher in der Wand� 3� Entfernen Sie die Installationsplatte von der Anschlussbox und schrauben Sie die Platte mit 4 Schrauben an der Montageunterlage fest�...
Page 20
Videor E. Hartig GmbH Exclusive distribution through specialised trade channels only. Videor E. Hartig GmbH Carl-Zeiss-Straße 8 63322 Rödermark / Germany Tel. +49 (0) 6074 / 888-0 Technical changes reserved Fax +49 (0) 6074 / 888-100 www.videor.com...