Advertisement
ULTRA CLEAR RESOLUTION CAMERA
Installation Instructions
1. Locate the mounting template at the installation position and drill the ceiling
or wall if needed.
2. Open the dome cover by loosening screws(4x12mm). Use the torque wrench
supplied.
- Place the dome base unit on pre-drilled position and fix it through using mounting
screws (4x30mm).
- Route the power source cable and connect cables.
- In the case of installation with optional mounting accessories(Surface mount
or Tilted mount), the power cable should be fixed to the flush mount by using
the fixing screw and cable holder.
3. Set the camera's viewing angle and adjust zoom/focus of lens
4. Put the dome cover to the dome base unit and tighten the assembly screws.
BOTTOM
Torque
Wrench
■ Optional Mounting Accessories
• Pole mount adaptor
• Surface mount
• Tilted junction mount
10
Mounting Screw
• Tilted mount
• Wall mount
(Requires additional
Surface mount)
Plastic Anchor
(6x30mm)
(4x30mm)
Advertisement
