Eneo DOME-WB8 Quick Installation Manual page 10

INP-54M2812MOA
1� Attach the drilling template to the installation position and drill into the wall�
2� Hammer the 4 dowels into the drilled holes in the wall�
3� Remove the installation plate from the connection box and screw the plate to
the mounting base with 4 screws�
4� Feed the power and BNC cable through the box�
5� Fix the box to the wall on the mounting plate and tighten the screws of the box
base to fix the box to the wall�
6� Connect the power and BNC cables to the camera cables�
7� Connect the safety cable to the correct place�
8� Mount the base cover of the PTZ dome camera to the box�
9� Align the mounting holes of the camera and turn the camera onto the cover in
the right place�
10