ULTRA CLEAR RESOLUTION CAMERA
Installation Instructions
1. Locate the mounting template at the installation position and drill the wall.
Insert the anchors to the drilled holes
2. Place the bracket on pre-drilled position and fix it through using mounting
screws.
3. Route the Power cable to the connecting place.
Fix the camera bracket through using mounting screws (4x30mm).
4. Set the camera's viewing angle and adjust zoom/focus of lens by using the
torque wrench.
Pan & Tilt adjustments
• Unlock the screw on the camera
bracket through using the torque
wrench(5mm) supplied.
• Set the camera's viewing angle
then lock the screw on the bracket.
Mounting Screw
: 4x30mm
Inclination
Tilt
10
2
Plastic Anchor
: 6 x 30mm
Torque Wrench (5mm)
1
Pan