Eneo DOME-WB8 Quick Installation Manual page 9

IND-6xx
1� Attach the drilling template to the installation position and drill into the wall�
2� Hammer the 4 dowels into the drilled holes in the wall�
3� Remove the installation plate from the connection box and screw the plate to
the mounting base with 4 screws�
4� Feed the power and BNC cable through the box�
5� Fix the box to the wall on the mounting plate and tighten the screws of the box
base to fix the box to the wall�
6� Connect the power and BNC cables to the camera cables�
7� Open the dome cover of the camera by loosening the screws and the cover
should be connected with a safety strap�
8� Attach the vandal-proof dome base to the junction box�
9� Adjust the angle of view of the camera�
10� Place the dome cover on the dome unit and tighten the screws�
EN
9