Removing And Refitting The Heater Insert - Barkey warming center III DTM Service Manual

Service manual
Barkey warming center III DTM
7.2

Removing and refitting the heater insert

WARNING
You must remove the plug from the mains before opening the device.
Removal:
Figure 15: Heater insert fixing screws
►
Pull the heater insert halfway out.
►
Loosen the low-heat device plug on the heater insert.
►
Now you can pull the heater insert out completely.
Figure 16: Assembly frame fixing screws
►
Pull the earthing cable off the spade connector (on the cover).
22
Barkey GmbH & Co. KG - Gewerbestrasse 8 - 33818 Leopoldshoehe - Germany - Head Office: +49 (5202) 9801-0
Customer Service: +49 (5202) 9801-30 Fax: +49 (5202) 9801-99 - e-mail: info@barkey.de
►
Loosen both screws which are used
to fix the heater insert.
►
Remove the six countersunk screws
on the cover plate and remove the
cover plate.
Service work