Table of Contents
Advertisement
Service manual
Barkey warming center III DTM
7
Service work
WARNING
Only qualified service personnel and employees of Barkey GmbH & Co. KG may
carry out service work on the Barkey warming center III DTM.
WARNING
In order to carry out service work, you must remove all temperature-regulated
goods from the heating chamber and store them in accordance with their respec-
tive manufacturer's instructions.
WARNING
You must remove the plug from the mains before opening the device.
WARNING
A technical safety inspection must be carried out on the Barkey warming center III
DTM after service work has been carried out.
WARNING
A technical safety inspection and an adjustment must be carried out after a regu-
lator circuit board or temperature sensor has been replaced.
20
Barkey GmbH & Co. KG - Gewerbestrasse 8 - 33818 Leopoldshoehe - Germany - Head Office: +49 (5202) 9801-0
Customer Service: +49 (5202) 9801-30 Fax: +49 (5202) 9801-99 - e-mail: info@barkey.de
Service work
Advertisement
Table of Contents
