Table of Contents
Advertisement
Technical safety inspections (TSI)
5
Technical safety inspections (TSI)
The Barkey warming center III DTM temperature setting is dependent on normal ageing
and the tolerances of the electronic components, as are all electronic devices.
In order to guarantee the temperature settings on the Barkey warming center III DTM
permanently within the stated tolerances, an annual technical safety inspection (TSI)
must be carried out by qualified service personnel or employees of Barkey GmbH & Co.
KG (see § 6 of the German MPBetreibV*).
The safety inspection should include the prescribed annual electrical safety check on the
Barkey warming center III DTM in addition to other points listed here.
WARNING
Only qualified service personnel and employees of Barkey GmbH & Co. KG may
carry out technical safety inspections.
WARNING
In order to carry out safety inspections, you must remove all temperature-regulated
goods from the temperature-regulated cabinet and store them in accordance with
their respective manufacturer's instructions.
NOTE
The date for carrying out the next technical safety inspection is printed on the date
label on the inside of the device.
Technical safety inspections to be carried out on the Barkey warming center III DTM are
mainly concerned with a temperature check in the temperature-regulated cabinet using a
calibrated thermometer, and testing of the overtemperature protection functions.
Device data must be entered at the top of every page in the inspection log. This informa-
tion must be entered on every page so that all pages of an inspection log can be clearly
allocated to one particular device.
►
Enter the name and address.
►
Enter the serial number from the nameplate.
►
Enter the setup measurement date in the "Setup measurement" box.
►
The current date must be entered in the date box.
5.1
Visual inspection
►
First, carry out a visual check on the Barkey warming center III DTM to be inspected.
The visual inspection must include all points stated in the inspection log in point 1.
Barkey GmbH & Co. KG - Gewerbestrasse 8 - 33818 Leopoldshoehe – Germany - Head Office: +49 (5202) 9801-0
Customer Service: +49 (5202) 9801-30 Fax: +49 (5202) 9801-99 - e-mail: info@barkey.de
Service manual
Barkey warming center III DTM
11
Advertisement
Table of Contents
