Y orientation by hydraulic expansion clamping sleeve
Optimum conditions
• Easy and quick adjustment of the tool's Y-orientation by means of the eccentric bush (+/- 0.2 mm)
Y ± 0.2 mm
Y ± 0.2 mm
Cleaning
• Check cleanliness of the mounting bore and quill
Clamping
• The
quill/drill holder
is clamped by turning the clamping screw up to its stop
• Do not clamp without a part
• Use only original INDEX drill holders
• Clamp only over the entire length of sleeve
Temperature
• Optimal temperature range between 10° and 50°
• Do not use at temperatures above 80°
Storage
• Store hydraulic expansion chucks unclamped, cleaned and lightly oiled
Product note
Base holder for boring slide
W9800029EN-02.02.18
Y
Y
13