D450 - Replacing Hydraulic Fluid - Index G220 Operating Instructions And Maintenance Instructions

Maintenance Summary - 4.000 Operating hours
D450 - Replacing hydraulic fluid
Orientation
Requirement
Procedure
Maintenance Instructions
G220
DIE017EN - 05.06.2019
Power off the machine and secure it against power on.
Use only approved hydraulic fluid. Details can be found in the
documentation and on the label of the hydraulic fluid tank.
For all work in connection with operating materials, the information in
the data sheets of the respective manufacturers and the information
in the document Notes on Operating Materials must be observed.
Specification and quantity of hydraulic fluid as specified in the
technical data.
Before replacing the hydraulic fluid, make sure that the required spare parts such as
seals and filters are available.
Use only the original filters according to the spare or wear parts list.
1. Suction off old fluid through the filler neck (a) or drain the fluid from the drain
plug (d) below the fill-level glass (c). Use a suitable collection bin for this
purpose.
2.
Use only lint-free cleaning cloths or a sponge!
75