Indicators In The Connection Area - Leuze electronic DDLS 508i Original Operating Instructions

Device description
3.3.3

Indicators in the connection area

For the status display of the Ethernet connection, the device is equipped with a split, two-colored LINK/ACT
LED in the connection area.
The LINK/ACT LED indicates the same state as the LINK LED in the control panel.
1 LED, Ethernet (split, two-colored) LINK/ACT
Fig. 3.7: LINK/ACT LED in the connection area
Tab. 3.5: Meaning of the LINK/ACT displays
LED Color
LINK/ACT ---
Green
Orange
Leuze electronic GmbH + Co. KG
1
State Description
OFF No cable-connected link to the connected device (see chapter
7.1 "Error displays of the operating state LEDs").
Continuous
light
Continuous
light/
flickering light
• The link to the connected device is OK.
• No data is sent or received.
• The link to the connected device is active.
• Data is sent and received.
DDLS 508i 21