Indicators And Operational Controls; Indicators And Operational Controls In The Control Panel - Leuze electronic DDLS 508i Original Operating Instructions

Device description
3.3

Indicators and operational controls

3.3.1

Indicators and operational controls in the control panel

Operating mode selector switch and operating mode indicator
• Operating mode selector switch [MODE]
The operating mode selector switch is used to switch between the operating modes of the device (see
chapter 6 "Starting up the device").
• Operating mode LEDs AUT, MAN, ADJ, LAS, LLC
The operating mode LEDs indicate the active operating mode.
1 AUT – Automatic
2 MAN – Manual
3 ADJ – Adjust
4 LAS – Alignment laser for mounting support
5 LLC – Link Loss Counter
6 MODE – Operating mode selector switch
Fig. 3.3: Operating mode LEDs and operating mode selector switch
Tab. 3.1: Meaning of the operating mode indicators
LED Color
AUT Green
MAN Green
Leuze electronic GmbH + Co. KG
State Description
Continuous light AUT operating mode (Automatic) active
Standard operating mode for data transmission
Note:
The optical link remains activated until the last orange LED
in the SIGNAL QUALITY indicator switches off.
Continuous light MAN operating mode (Manual) active
Operating mode for fine adjustment of the devices via SHA
(see chapter 6.2.2 "Fine adjustment with the single-handed
adjustment (SHA) process").
Note:
The optical link remains activated until the last green LED in
the SIGNAL QUALITY indicator switches off.
DDLS 508i
1 2 3 6
4 5
15