Overview Embroidery Functions; Center The Needle To The Embroidery Hoop - Bernina 590 User Manual

> Position the hoop below the embroidery foot.
> Press both attaching mechanisms (1) of the hoop towards each other.
> Position the embroidery hoop (2) above the bracket of the embroidery arm.
> Press the hoop down until it clicks in position.
> Release the attaching mechanism (1).
1
> Press the attaching mechanisms of the hoop towards each other to remove the hoop.
> Remove the hoop.

Overview Embroidery functions

1 Centering the embroidery hoop to the needle 4
2 Moving the hoop to the back
3 Moving the module for the sewing mode

Center the needle to the embroidery hoop

Relocating the embroidery hoop facilitates threading when the needle is close to the embroidery hoop.
> Touch the icon «Embroidery hoop display/Embroidery hoop selection».
> Touch the icon «Center the needle to the embroidery hoop».
> Threading the upper thread.
P
> Push the button «Start/Stop» to move the embroidery hoop back to the last position.
1
2
1
2
3
4
5
5
6
Embroidering preparation
Grid on/off
Motif center
Virtual Positioning (is visible while scrolling)
145