Overview Embroidery Functions; Center The Needle To The Embroidery Hoop; Moving The Hoop To The Back - Bernina 720 User Manual

Overview Embroidery functions

1 «Center Embroidery Hoop to Needle»
2 «Move Hoop to the Back»
3 «Move Hoop to the Left»

Center the needle to the embroidery hoop

Relocating the embroidery hoop facilitates threading when the needle is close to the embroidery hoop.
> Tap «Hoop Indicator/Select Hoop».
> Tap «Center Embroidery Hoop to Needle».
> Thread the upper thread.
P
> To move the hoop back to its previous position, push the button «Start/Stop».

Moving the hoop to the back

To facilitate changing the bobbin, it is recommended to move the hoop to the back before threading. This
makes it easier to open the bobbin cover.
> Tap «Hoop Indicator/Select Hoop».
> Tap «Move Hoop to the Back».
> Thread the bobbin thread. (see page 47)
P
> To move the hoop back to its previous position, push the button «Start/Stop». If necessary, pull back the
upper thread.
1
2
3
4
5
4 «Grid On/Off»
5 «Center Motif»
6 «Virtual Positioning»
(becomes visible by scrolling)
Embroidering preparation
139